3rd gen Spindles

[GlennCMC70]

Looking to buy a pair of 3rd gen spindles. Let me know.

[GlennCMC70]

Got a pair of spindles.
Looking for some more stuff now.
I need a pair of rotors. Junk ones are OK as long as the bearing races are in good shape since I'm gonna cut the disc off. Bearings that are good for at least mock-up, outter washers and retaining nuts. Let me know what you have and what you need for it. Bring it to ECR if you can.

[Alien]

I'm your huckleberry (for the rotors anyways)

http://www.fototime.com/C0B84A7DF86421B/orig.jpg

http://www.fototime.com/FB9A97E56D2CB2A/orig.jpg

Both have big cracks in the disc part, but the races are still good.

I used them to hold down my EZ-up (since they are fairly compact and heavy); used a lugnut on a stud to hold down a 1" ratchet strap. One has a bit of surface rust since they sat outside a weekend or two. Can you find something that can replace them?

[GlennCMC70]

Got ya covered Gary. 2 @ 45lbs each good enough? I may have 4, I need to look.