Racer friendly machine shop?

[jdlingle]

Anybody know a really racer freindly machine shop, preferably in the Houston area unless its REALLY friendly;)? I need to have some large spacers machined down as soon as the track width rules are finalized for the SN-95s. They are aluminum spacers and Im probably gonna have to have at least a half inch knocked off each side. I have no experience whatsoever with machine shops so looking for a good deal. Any suggestions? Also anybody know what a good price would be for this work? Thanks in advance.

[cjlmlml]

Not Houston, but Richard Painter 817 907 8924 tell hom you know Chris Lyons, dont tell him you know Burch

[RichardP]

Dan Allford has a shop at I-10 and the beltway. He said he would do it for $0.00 but you have to put a 6" Arc Specialties sticker on your car... :-)

(713 _ 906 _ 1171)

It's worth having him do it just so you can get a tour of his shop...


Richard P.

[GlennCMC70]

Dan Allford has a shop at I-10 and the beltway. He said he would do it for $0.00 but you have to put a 6" Arc Specialties sticker on your car... :-)

(713 _ 906 _ 1171)

It's worth having him do it just so you can get a tour of his shop...


Richard P.

I agree and the price can't be any better.

[jdlingle]

Sweet! I will give him a shout today to touch base.

[jdlingle]

He said he would do it for $0.00 but you have to put a 6" Arc Specialties sticker on your car...


Richard P.

Whats one more sticker at this point? :D

Seriously thanks though for passing this info along.