mitchntx
02-10-2012, 10:32 AM
LT1 Long block plus - $650
Oil pan to throttle body including opti and water pump.
No other accessories
Took this motor as part of a larger deal.
Reman motor from a chain reman builder on the west coast.
Saw a receipt, but can't find it now.
Never installed ... never even looked it over.
http://www.lawmotorsports.net/mw/stills/parts/LT1_LB1.jpg
10 bolt diffs
Complete - >>>SOLD <<<
3.42 Torsen (not a T2R)
axles
sway bar (19mm)
Semi-complete - $75
The LSD was trashed and the yoke is gone
Basically a housing plus ...
http://www.lawmotorsports.net/mw/stills/parts/diffs1.jpg
Severn brake ducts - >>> SOLD <<<
Mounts to the knuckle and blows air into the center of the rotor
Well used, but functional.
Similar to this setup ...
http://img.photobucket.com/albums/v91/stillwill/Myles pics/Brake ducts/alduct2.jpg
C5 brake upgrade - $450
NIB C5 calipers
NIB Bob Bishop design Track brackets
NIB ARP wheel studs
PABs
98-02 knuckles w/ upper A-Arms amd hubs
Ready to bolt-in
Make an offer
Water pumps
Accessory brackets
Alternators
Exhaust manifolds
Steering racks
Factory radiator fans
Factory intake air ducting
e-mail is the best way to get me.
http://www.lawmotorsports.net/sig.jpg
Oil pan to throttle body including opti and water pump.
No other accessories
Took this motor as part of a larger deal.
Reman motor from a chain reman builder on the west coast.
Saw a receipt, but can't find it now.
Never installed ... never even looked it over.
http://www.lawmotorsports.net/mw/stills/parts/LT1_LB1.jpg
10 bolt diffs
Complete - >>>SOLD <<<
3.42 Torsen (not a T2R)
axles
sway bar (19mm)
Semi-complete - $75
The LSD was trashed and the yoke is gone
Basically a housing plus ...
http://www.lawmotorsports.net/mw/stills/parts/diffs1.jpg
Severn brake ducts - >>> SOLD <<<
Mounts to the knuckle and blows air into the center of the rotor
Well used, but functional.
Similar to this setup ...
http://img.photobucket.com/albums/v91/stillwill/Myles pics/Brake ducts/alduct2.jpg
C5 brake upgrade - $450
NIB C5 calipers
NIB Bob Bishop design Track brackets
NIB ARP wheel studs
PABs
98-02 knuckles w/ upper A-Arms amd hubs
Ready to bolt-in
Make an offer
Water pumps
Accessory brackets
Alternators
Exhaust manifolds
Steering racks
Factory radiator fans
Factory intake air ducting
e-mail is the best way to get me.
http://www.lawmotorsports.net/sig.jpg