PDA

View Full Version : Wanted 17x9.5 Z06 wheel prices



Alien
05-15-2014, 01:13 PM
What are you guys paying for OEM Z06 17x9.5 wheels? What's a good price for a pair?

I'm seeing a few full sets for sale here and there. What's a good price for a full set? Is it easy enough to resll the 18" rears? If so, for how much?

Thanks

Fbody383
05-16-2014, 09:30 AM
What I have heard from the guys I asked is $350-$450 with common 4X17 being around $400.

I too would like a set (... or two)

Help the lesser speedy out... wheels for the slow... wheels for the slow.

mach1
05-16-2014, 11:02 AM
Must be nice, I had to drop 1k for 17x9.5 wheels for my junk.

Fbody383
05-16-2014, 11:12 AM
Must be nice, I had to drop 1k for 17x9.5 wheels for my junk. You could have stayed on 16s and used the 'bling wing' to balance it out.

Fbody383
05-16-2014, 11:13 AM
And any input on the difference in performance between the 17X9 and 17X9.5 wheels?

mach1
05-16-2014, 02:48 PM
You could have stayed on 16s and used the 'bling wing' to balance it out.

Haha, keep em coming :)


And any input on the difference in performance between the 17X9 and 17X9.5 wheels?

I think GRM did an article and in miata land a 15x9 vs a 15x8 on a 225 tire was supposedly .5 sec lap, ~1:30 course, don't quote me on this.

y5e06
05-17-2014, 09:24 PM
$400 for a full set of 17x9.5 alcoa's or Speedlines would be good, in my opinion.
actually would seem easier to sell the 18's as a set of four than 17's. mostly i seem the 17's as those Y-Body guys going to a square 18" setup.

Alien
05-18-2014, 11:31 AM
Thanks guys. My search begins...


Must be nice, I had to drop 1k for 17x9.5 wheels for my junk.
Had to, or chose to?

I thought most of the mustang guys used a "cheap" MB wheel (weapons or battles?) from Discount Tire for about $169 each and are somewhat close to the min weight. (yeah, cheap in quote because it still sucks to spend $700 on a set of wheels)

Keep in mind third gens have the option to go with something like a CCW $$$ or a CTW wheel $1125 /set if we want something with the correct offset and close to min weight.

It's either that or go with these cheaper 4th gen/Z06 wheels and ~4lb adapters on each corner. Or stay on 16's and go with an even narrower and shorter tire than the RA1 offerings. So shush you :)

marshall_mosty
05-18-2014, 11:55 AM
I'd say the Z06 with the 4lb spacer would be the hot ticket then...