Pranav
06-26-2017, 10:49 PM
It's the block thingy that slides into the middle of the torsen to hold apart the axles and secure the c clips.
It is the same part for the t2r and the factory 98-02 torsen.
Interested in the block/paddle by itself but if you have a complete stock torsen or even a t2r I may be interested in it as a complete spare.
Long story short when I swapped the diff out at Hallett mistakenly, I had to cut the block retaining bolt out because the head was stripped, dinged the block with the cutting wheel. Rest of diff was perfectly fine so I'd like to put it back in if I can find a replacement block.
It is the same part for the t2r and the factory 98-02 torsen.
Interested in the block/paddle by itself but if you have a complete stock torsen or even a t2r I may be interested in it as a complete spare.
Long story short when I swapped the diff out at Hallett mistakenly, I had to cut the block retaining bolt out because the head was stripped, dinged the block with the cutting wheel. Rest of diff was perfectly fine so I'd like to put it back in if I can find a replacement block.