Pranav
02-21-2018, 11:56 AM
Got a bunch of stuff that is still good and great as spares:
Alternator
Starter
95+ exhaust manifolds, painted inside/out and flat surfaces
Clean stock pan/gasket
Stock rails/injectors, clean and ran sta-bil thru them
Complete stock intake w rails
Complete throttle body assembly with nice/new aluminum top plate
Stuff that makes you faster:
1le gold wrapped intake elbow and Opti vacuum harness, both were recently new
Aeromotive fuel pressure regulator. Run an extra lb of pressure and you'll run 12:1 afr and won't need a restrictor anymore
ATI steel crank hub
Lt1 supply rail with a 6an fitting tig-ed on
Valve covers with 10an bungs on them
Can bring to cresson
Alternator
Starter
95+ exhaust manifolds, painted inside/out and flat surfaces
Clean stock pan/gasket
Stock rails/injectors, clean and ran sta-bil thru them
Complete stock intake w rails
Complete throttle body assembly with nice/new aluminum top plate
Stuff that makes you faster:
1le gold wrapped intake elbow and Opti vacuum harness, both were recently new
Aeromotive fuel pressure regulator. Run an extra lb of pressure and you'll run 12:1 afr and won't need a restrictor anymore
ATI steel crank hub
Lt1 supply rail with a 6an fitting tig-ed on
Valve covers with 10an bungs on them
Can bring to cresson