y5e06
03-02-2023, 12:06 PM
Update: Free engine!
come get this.
I'll keep the front cover, opti, ignition coil/module, and maybe balancer.
so basically come get the long block.
Original post:
I have the previous engine out of #95. Developed some sort of rattle at TWS in 2017 with a loss of power. It still ran. Didn't quite sound like rod knock, but who knows. I didn't disassemble it, I just built a new motor and pushed it to the side.
Comes nearly complete oil pan to intake... except:
has a canton pan and pickup I *plan* to keep, will throw on a stock LT1 pan
Has a oil cooler adaptor which I will keep.
Has injectors/rail/regulator but there may be something wrong as when I used them on the last new engine it wouldn't run. So I swapped them over and this set is the one that didn't work.
includes:
exhaust manifolds (may have an 2nd set too)
accessory brackets, missing the AC bypass pulley (reused for last engine)
water pump
balancer
GM opti (worked! didn't have ignition issues)
coil & module
intake
heads w/ stock valves & LT4 valve springs
forged SRP pistons
stock crank
stock rods
ARP rod bolts
Turn-one or PSC power steering pump w/ stock reservoir
thats all I can remember off the top of my head, its buried under other parts in the garage.
Make offer, come pick it up. Located south of austin; between Buda & Driftwood.
Text, don't IM/PM as I'll never check. *512**632**1844*
come get this.
I'll keep the front cover, opti, ignition coil/module, and maybe balancer.
so basically come get the long block.
Original post:
I have the previous engine out of #95. Developed some sort of rattle at TWS in 2017 with a loss of power. It still ran. Didn't quite sound like rod knock, but who knows. I didn't disassemble it, I just built a new motor and pushed it to the side.
Comes nearly complete oil pan to intake... except:
has a canton pan and pickup I *plan* to keep, will throw on a stock LT1 pan
Has a oil cooler adaptor which I will keep.
Has injectors/rail/regulator but there may be something wrong as when I used them on the last new engine it wouldn't run. So I swapped them over and this set is the one that didn't work.
includes:
exhaust manifolds (may have an 2nd set too)
accessory brackets, missing the AC bypass pulley (reused for last engine)
water pump
balancer
GM opti (worked! didn't have ignition issues)
coil & module
intake
heads w/ stock valves & LT4 valve springs
forged SRP pistons
stock crank
stock rods
ARP rod bolts
Turn-one or PSC power steering pump w/ stock reservoir
thats all I can remember off the top of my head, its buried under other parts in the garage.
Make offer, come pick it up. Located south of austin; between Buda & Driftwood.
Text, don't IM/PM as I'll never check. *512**632**1844*