Looking for options to relocate the shifter in BlueFirePony.
I've emailed Autoworks to see if they have a kit.
Currently have a Steeda Tri-Ax mated to the stock 3650.
Printable View
Looking for options to relocate the shifter in BlueFirePony.
I've emailed Autoworks to see if they have a kit.
Currently have a Steeda Tri-Ax mated to the stock 3650.
There is a thread about this on the National AI forum. check there.
Also, Corner-Carvers is a good place to search for this info.
Yep, saw the Nats thread a while back...I am hoping the restomod will bolt up to the Tri-Ax (its got several mounting points so it should).Quote:
Originally Posted by GlennCMC70
I'll check CC.com as well. Thanks Glen.
The restomod will line up fine as long as you have room to mount the base behind it. Mine replaced a Tri-ax handle on the shifter that came with the TKO-600.Quote:
Originally Posted by BlueFirePony
Not sure if this one fits the 3560... item # 391 5074
I've looked at the restomod shifters (and other custom made jobs) and they seemed to have some lateral slop. If you can get in touch with Daron or Mason, they have been using one and could give you more info
http://go.mrgasket.com/newproducts/flyers/NPHurst.pdf
We have the Restomod piece bolted up to a TKO600.
It works very well, but it's not perfect. The connections between the links are via nut / bolt, so the extent of slop versus friction is determined by the nut / bolt torque. You do need to keep up with maintaining the "right" torque. When it's right, it works great. When it gets a little loose, you can miss shifts.
So, it could be better, but it is a good off-the-shelf solution for a fair price. I'd buy it again.