Torsen T2: need to pull axle. Instructions?

My orange SN95 came with a Torsen T2. Wheel seal on driver's side is leaking so thought I'd pull that axle and replace the seal and bearing while I'm at it.

I see plenty of instruction online on how to pull the axle for a stock installation. I don't however see any instructions on the procedure when you have the Torsen.

Anyone have experience here?

Thank you. I feel like I'm constantly asking for advice. Once I get on track you all will be kicking my ass at least early on so hopefully that makes up for all the advice I'm asking.

Its the same as the stock. Everything looks a little different inside but you still have c-clips. On the T2R the clips are behind a big washer.

JJ

Thank you. Now I have to figure out how to remove the bolt, which was slightly rounded by someone else. It's always something...