ok....question #2. Besides the pics of the roll cage plates....can you guys take a look at these photos and see if you see anything wrong with making something like this for the race car. These are pics of a radiator/fan setup that I just did for my truck and was thinking I could do the same for the car.
Also going to try and find a radiator that will fit in the stock location that has an oil cooler and tranny cooler built in like this one. Unless someone can tell me otherwise.
http://i104.photobucket.com/albums/m...r/101_0333.jpg
http://i104.photobucket.com/albums/m...r/101_0334.jpg
http://i104.photobucket.com/albums/m...r/101_0335.jpg
http://i104.photobucket.com/albums/m...r/101_0336.jpg
The aluminum was free (love working at a machine shop!) and the two fans were $60 a piece (lifetime warranty) Radiator was $178 (lifetime warranty) So that puts me at $300 for a setup that should cost $600.
If all goes well with the car radiator I'm thinking of fabbing up a couple of kits for anyone that might want them.
Thanks in advance for the help ya'll!