Mitch...you definitely should NOT sell your car. You can always take a break unitl the itch strikes again.Quote:
Originally Posted by GlennCMC70
I keep saying I am going to take break for a while, but seem to get sucked back in every year.
Printable View
Mitch...you definitely should NOT sell your car. You can always take a break unitl the itch strikes again.Quote:
Originally Posted by GlennCMC70
I keep saying I am going to take break for a while, but seem to get sucked back in every year.
Michael, why not spherical bushing on both sides of that upper arm then? Does nobody make the parts or are you running urethane on one side on purpose? What are you running on the lower arms?
You can not buy just a spherical bushing for the body side of the arm. The only way to get a spherical bushing in the body side is to get an aftermarket UCA and I think all of them are adjustable. (Not 100% sure though) Like the link below:Quote:
Originally Posted by Al Fernandez
http://www.latemodelrestoration.com/...-Solid-Bushing
On the lower I am running the MM "Heavy duty" arms. They have spherical on the diff end and poly on the body end. MM does make an "Extreme Duty" arm that does have spherical on both ends.
Quote:
Originally Posted by michaelmosty
I seem to remember Boudy selling a spherical bearing setup for the body side of the upper arms at one point? It would be conceptually the same as the lower front control arm bushing he sold. I'm not sure if either is available anymore???
Richard P.
Everyone wanted more hp, bigger brakes and more traction (CMC2).. ALL these things add stress to a stock chassis.
I believe someone mentioned AI lite... well thats where its going...
there was NOTHING wrong with CMC1... BUT NOOOOOO...
Instead of practice and improving driving skills, we work on making the car faster instead of making the driver faster...
I would love to switch cars sometime and compare lap times... Owner drives contingency races and switch for the other two..
Just sayin....
I was told of a East Coast region that is running a CMC Vintage type class. I have no details, no more facts, and names to point you to. Perhaps a revolution has started?Quote:
Originally Posted by David Love AI27
Instead of revolting (anymore).. I have decided to spend my efforts on my driving... My goal is to put a true CMC1 car on the podium... 2013 may be my last year to compete in CMC then I'm going back to AI in the 27 car, so its now or neverQuote:
Originally Posted by GlennCMC70
If a rule change would be made to allow aftermarket upper arms, you could put together a spherical bearing upper arm for about $75 from the Coleman Catalog...
If such a rule were written, is your intent to replace only the right side upper control arm with a custom arm with spherical bearings, or would you come up with something that connected a fabbed single upper arm down the centerline to some type of bracketry that tied the two body and the two axle attachment points together for potential added strength?Quote:
Originally Posted by marshall_mosty
It would take an act of God to let us run the part Marshall decribes. No way anything like this would fly. As I have said before I changed to a Poly bushing the one side (all stock) held up fine.Quote:
Originally Posted by MHISSTC
JJ