Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: WTB Left Rear Quarter Panel for Fox Mustang Hatch

  1. #1
    Senior Member Carroll Shelby donovan's Avatar
    Join Date
    Feb 2006
    Location
    Austin, Texas
    Posts
    1,236

    WTB Left Rear Quarter Panel for Fox Mustang Hatch

    Just as the subject states...

    Looking for a Left Rear Quater Panel for my 91 Fox Hatch.

    I plan on pounding out the damage for the October event, but this winter I want to fix it properly.

    Thanks.

    DD
    Attached Images Attached Images

  2. #2
    Senior Member Carroll Shelby mitchntx's Avatar
    Join Date
    Mar 2006
    Location
    Enjoyin' the view
    Posts
    4,726
    Hey ... Boudy has that missing light bulb!!!!!

  3. #3
    Senior Member Carroll Shelby marshall_mosty's Avatar
    Join Date
    Mar 2006
    Location
    Denton, TX
    Posts
    3,333
    David,
    Pound it out... No one will ever know.
    Marshall Mosty
    AI/SI Texas Regional Director
    2011 NASA-TX American Iron Champ
    AI #67 "Mosty Brothers' Racing" (RIP)
    ST6 #21 Toyota Corolla (being revived)...

  4. #4
    Senior Member Grass-Passer y5e06's Avatar
    Join Date
    Mar 2006
    Location
    East of Driftwood
    Posts
    502

    Re: WTB Left Rear Quarter Panel for Fox Mustang Hatch

    Quote Originally Posted by donovan
    ... this winter I want to fix it properly.
    shouldn't you be spending that time getting the SN95 up for AI????

    Dust Collector

  5. #5
    Senior Member Grass-Passer Wirtz's Avatar
    Join Date
    Mar 2006
    Location
    Round Rock
    Posts
    825
    The quarter on the Camaro was bent up WAY worse than that and we were able to pull it out using a protable frame from a buddy. When I scoped it, replacing the whole quarter properally was alot of work (do-able however). I was pretty hesitant to pull the damage on the Camaro but it seems to have worked out fine.

    Jeff

  6. #6
    Senior Member Site AdminCarroll Shelby michaelmosty's Avatar
    Join Date
    Mar 2006
    Location
    Dallas, TX
    Posts
    2,837
    David,
    I have one from a roller down here in Dallas you can have. You are welcome to it but I bet a strategically placed sledge hammer and some bondo would be an easier fix.

    Let me know which way you want to go and I can always bring the quarter with me to Houston.
    -Michael Mosty
    CMC #11 Mosty Brothers' Racing
    Director - TX Region

  7. #7
    Senior Member Carroll Shelby donovan's Avatar
    Join Date
    Feb 2006
    Location
    Austin, Texas
    Posts
    1,236
    I guess I need to talk with Jeff W. first... but I will keep that in mind Michael.

    The lip over the tire is fine, its just the area in front and behind the wheel opening that is banged up... the area around the tail light is pulled in toward the front of the car, so the lens housing to body has about a 1/4 inch gap... nothing serious...

  8. #8
    Senior Member Site AdminCarroll Shelby michaelmosty's Avatar
    Join Date
    Mar 2006
    Location
    Dallas, TX
    Posts
    2,837
    Sounds good David.
    -Michael Mosty
    CMC #11 Mosty Brothers' Racing
    Director - TX Region

  9. #9
    Senior Member Carroll Shelby marshall_mosty's Avatar
    Join Date
    Mar 2006
    Location
    Denton, TX
    Posts
    3,333
    Our cars could be twins...

    I guess tires react with Mustangs in the same manner, regardless of what side you smack them.



    Marshall Mosty
    AI/SI Texas Regional Director
    2011 NASA-TX American Iron Champ
    AI #67 "Mosty Brothers' Racing" (RIP)
    ST6 #21 Toyota Corolla (being revived)...

  10. #10
    Senior Member Carroll Shelby donovan's Avatar
    Join Date
    Feb 2006
    Location
    Austin, Texas
    Posts
    1,236
    You were able to pound it out?

    Did you have to use any filler and repaint?

    DD

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •