Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: ***SOLD*** 1989 CMC MUSTANG (2004/2005 Texas Champion)

  1. #1
    SmackDaddy
    Guest

    ***SOLD*** 1989 CMC MUSTANG (2004/2005 Texas Champion)

    <<<<<>>>>


    1989 CMC MUSTANG
    2004/2005 CMC CHAMPION - TEXAS REGION



    Before the Saleen wing and black bottom






    1989 Mustang (red upper/black lower)
    Fresh 306 short block
    Cobra GT-40 Heads (not ported)
    New Cobra Intake
    Cobra cam
    Cobra MAF
    Cobra Computer
    24lb injectors
    Cold air pipe (not in fender well)
    BECOOL Radiator
    Electric Fan
    Oil Cooler
    K&N filter (new)
    New FMS flywheel
    New clutch
    New pilot bearing
    T-5 Transmission
    Steeda Tri-ax shifter
    FMS Aluminum Drive shaft
    Eaton 31 spline diff
    3” axle studs at all corners
    Moser 31 spline axles (5 lug)
    3.73 FMS gear
    Maximum Motorsports Pan hard bar
    Cobra PBR front brakes
    12” rotors
    Cobra rear brakes
    New Hawk Blue’s in rear
    Hotchkis Lower control arms
    Stock upper control arms
    SN95 front control arms (with offset bushings)
    MM bump steer kit
    Bilstein MM valved struts
    Bilstein shocks
    Linear rate springs (front/rear)
    Strut tower brace (not installed)
    Autopower bolt-in cage
    New front windshield
    New(er) hood
    New hood pins
    Saleen replica rear wing
    ASA AJ5 5 lug wheels
    Toyo tires 40% left
    4ea. Extra Toyo tires – 50% left
    2ea. Extra wheels (ROH’s) w/tires
    Extra set front rotors
    New set Hawk HT-10 front pads
    Longacre camber gauge (never used/in metal case)
    Longacre bump steer gauge (used)
    Front smoked head light covers (used)
    New front smoked head light covers (new/in-box)
    Autometer 2 5/8” phantom oil pressure/water temp/oil temp.
    Quick disconnect steering wheel (new)
    Momo 13” wheel (new)
    Corbeau seat (old Clubman and will need to be replaced)
    Sabelt 6pt racing harness (good until 2010)
    Battery box (metal) in passenger side
    Window net
    Cut-off switch (on fender)
    Fire extinguisher
    Side windows – glass intact and rolls up
    Power mirrors – still works (needs new switch)
    Truck release – remote button works

    Also included: 2ea fenders (white passenger/driver) like new. Extra hood (original hood – needs body work)

    NASA Log book
    Notebook with pictures and dyno graphs


    *Bought a new house and no place or time for this setup.*

    Also as an option is a 16’ open trailer and can be included as a package deal. This setup is turn-key and will be loads of fun!!! This Mustang has set the fastest times at all the tracks in the Texas/Louisiana/Oklahoma region. It’s a proven winner and should provide a platform that is competitive on all levels.

    If you have any questions, please send an e-mail to: cmc17@tek-racing.net

    **More pictures to be added soon. Please e-mail with specific requests if needed. I tried to make the list as complete as possible, but probably forgot something.

    CMC17 (build site: http://www.bns-racing.com/89CMC.htm )

    PRICE: $6,500 w/Trailer O.B.O. $6,000 without trailer O.B.O.

  2. #2
    Senior Member Carroll Shelby
    Join Date
    Mar 2006
    Location
    Spring, TX
    Posts
    3,005
    End of an era, Smackdaddy...whoever you are. :cry:

  3. #3
    SmackDaddy
    Guest
    Car has been sold!

    Thanks Jerry!!!!

    8)

  4. #4
    Senior Member Carroll Shelby jeffburch's Avatar
    Join Date
    Mar 2006
    Location
    Bedford,Tx
    Posts
    2,769
    Jerry Jordan.
    DE friend of The Driver's Edge.
    Welcome to NASA Tx!!

    Jerry is a great guy and a tough competitor.
    A great addition.

    Good luck,
    jb

  5. #5
    Senior Member Carroll Shelby GlennCMC70's Avatar
    Join Date
    Mar 2006
    Location
    Ft. Worth
    Posts
    6,448
    Blog Entries
    1
    well as much as i like seeing new guys coming in, i hate it more to see Eric leave. good luck to you Eric in whatever you do. glad the car is staying local.

  6. #6
    Senior Member Carroll Shelby marshall_mosty's Avatar
    Join Date
    Mar 2006
    Location
    Denton, TX
    Posts
    3,333
    Eric,
    It was fun... Hope to see you around the track in the future.
    Marshall Mosty
    AI/SI Texas Regional Director
    2011 NASA-TX American Iron Champ
    AI #67 "Mosty Brothers' Racing" (RIP)
    ST6 #21 Toyota Corolla (being revived)...

  7. #7
    SmackDaddy
    Guest
    Quote Originally Posted by marshall_mosty
    Eric,
    It was fun... Hope to see you around the track in the future.
    Thanks Marshall!

    Was fun to hang with you and Michael. Thanks for all the help and support along the way.

    /cheers

  8. #8
    Administrator Site Admin
    Join Date
    Feb 2006
    Location
    United States
    Posts
    258
    guess you don't need those 2 pushrods I owe you anymore.....

  9. #9
    SmackDaddy
    Guest
    Quote Originally Posted by j3ffbrooks
    guess you don't need those 2 pushrods I owe you anymore.....
    I thought you already took care of that. No?

    Thx. though

  10. #10
    Senior Member Grass-Passer macstang's Avatar
    Join Date
    Mar 2006
    Location
    Mississippi
    Posts
    280
    WOW

    Good luck Eric. That is a hell of a price for a turn key car.

    I miss racing and I am sure you will too. Hope to see you on track again someday.
    Jerry
    Team Warhorse-Bishop/MacNeil
    CMC Mustang #44
    Red 1993 Mustang TTB # 15

    >>>>RETIRED-PENDING OVERSEAS TOUR<<<<

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •