I have a set of MM SN95 offset front lower control arms that I want to trade for a set of Fox length non-offset control arms. Mine are in very good condition and am looking for the same.
I went from the Fox to the SN-95 on the AI car and they were very different with regards to the forward offset due to the length of the arms. I don't know how much different it would be with the Griggs K-member.
May or may not fit without trimming the fenders, I'm sure that is the reason your are wanting to non-offsets.
You are welcome to try them. They are in a box on the shelf.
The difference is how each company got the desired results. Griggs control arm is very close to stock but they achieved the longer wheel base by means of the k-member. MM's k-member is close to stock but they used the control arm to more the wheel forward. If I went with the offset fca's and a Griggs k-member the wheel base would be extra long. My fenders are already cut and tweaked. Here is a pic with Griggs pieces and 275's before trimming the 2nd time.
Bookmarks