Does anyone know where to buy PBR calipers NEW that are south of $200 each?
http://www.autopartswarehouse.com/de...W47bc75e2bd0dd
PBR #'s
W0133-1602203
W0133-1602253
These are the 2 hole used on Cobras, 1LE's, C4's, Baer trackpaks etc.
thx,
jb
Does anyone know where to buy PBR calipers NEW that are south of $200 each?
http://www.autopartswarehouse.com/de...W47bc75e2bd0dd
PBR #'s
W0133-1602203
W0133-1602253
These are the 2 hole used on Cobras, 1LE's, C4's, Baer trackpaks etc.
thx,
jb
Gene Evans Ford Racing
http://www.gefracing.com/Mustang1/Brakes.asp#M-2300-X
Rob Liebbe - Texas Region
Camaro, Mustang, doesn't matter to me, I'll race it.
I have used ones from O'Reilly. I think they are around $60 each.
-Michael Mosty
CMC #11 Mosty Brothers' Racing
Director - TX Region
might also try
www.buyfordracing.com
they have specials for new stuff all the time...might just have to have a pony or cobra written on it which might piss of the car gods! :lol:
Ah, fugg it.
Jeff,
Try this guy.
http://cgi.ebay.com/ebaymotors/ws/eB...m=120326399784
Gary Hood
CMC #20
OH WOW! Racing
Lookin for new.
Will these work?
http://www.buyfordracing.com/shop/pr..._id=689cPath=6
jb
ps, what happened to the description of piston diameter in the rules?
Newer pbr's were described/allowed for fords only?
38mm vs 40 or 44mm?
Originally Posted by jeffburch
On the anal-retentive side:
The Ford version of the caliper brackets are dimensionally the same as the GM brackets except for the bolt size (12mm vs. 14mm).
The later PBR calipers use a slightly larger diameter pistion than the early PBR calipers (38mm vs. 40) This will cause a small shift in bias and pedal feel.
The later PBR calipers also have a different thread pitch for the fluid line. Might require a different banjo bolt.
The later PBR calipers are a different casting than the early Corvette, 1LE calipers with much more bracing in bridge area. This makes for a better caliper but with some wheel fittment issues possible.
Richard P.
The '06 rulebook used to say I couldn't use the 40mm.Originally Posted by RichardP
I can deal with the hardware changes.
You didn't mention the bling paint and the ponies on the side 8)
Thx RP.
jb
40mm PBRs are just fine rules wise JB
Al Fernandez
Thx AF!
Anybody know where I can find EFI schematics '86-'93 Ford Mustangs.
Preferably, online in printable pdfs.
thx,
jb
Bookmarks