2011- Texas Region CMC2 Rookie of the Year.
2012- Broke with no car.
2013- Author- Hard Luck Lloyd: The Complete Story of Slow-Talking, Fast-Driving Texan Lloyd Ruby
I was going to but time is getting in the way. FMR
I wouldn't use an AL roller rocker arm in a road-race motor. Steel units from Comp Cams are the way to go.
Look at a set of StopTech's.
Last edited by Adam Ginsberg; 12-22-2011 at 04:29 PM.
Nice new bullet Frank...
Glad to see Mike is getting his car back together.
James Proctor
http://www.jp-motorsports.com
Adam G.
CMC #5
2009 California Pony Car Cup CMC Champion
2009 SoCal CMC Champion (Team Hollywood)
2012 Kona Blue Metallic Boss 302 #1710
Buy a hooptie, then race that mofo!
NASA SoCal Race Director
Mike,
Glad you see yours is going well.
Frank,
Glad you decided not to run R4... ended up being a smart move.
I spent yesterday finishing up the brake lines and getting ballast backing plates installed in the rear passenger seat area so I can hang 90lbs of ballast under each side of the car (if needed). Gotta love 300# ballast rules.
Filled the car up with oil, installing new spindles, new front ball joints... Will make more progress Tuesday when I can have another full day down at the shop. Time is ticking and I really want to get to MSR-C next week to test the ABS.
Marshall Mosty
AI/SI Texas Regional Director
2011 NASA-TX American Iron Champ
AI #67 "Mosty Brothers' Racing" (RIP)
ST6 #21 Toyota Corolla (being revived)...
Hmmm... no wonder it no "go" no more...
#39 CMC Camaro
Orange is Fast!
CMC-NT01 FTW!
Bookmarks