Page 140 of 308 FirstFirst ... 4090130138139140141142150190240 ... LastLast
Results 1,391 to 1,400 of 3071

Thread: So, what did you do today?

  1. #1391
    Senior Member Grass-Passer jdlingle's Avatar
    Join Date
    Oct 2010
    Location
    Houston, TX
    Posts
    341
    Jackstands baby! Suspension is at full droop in the pic. I can assure you it looks much more like a race car now. Had to reweld my exhaust after the rear spring change.
    2011- Texas Region CMC2 Rookie of the Year.
    2012- Broke with no car.
    2013- Author- Hard Luck Lloyd: The Complete Story of Slow-Talking, Fast-Driving Texan Lloyd Ruby

  2. #1392
    Senior Member Grass-Passer
    Join Date
    Aug 2008
    Location
    Houston
    Posts
    299
    Bryan, is your guy still interested in making restrictor plates? I would like to get a set of 4 or 5 before the dyno day.
    -Wayne
    -CMC #85

  3. #1393
    Senior Member Carroll Shelby
    Join Date
    Feb 2007
    Location
    Plano
    Posts
    1,983
    Blog Entries
    2
    Quote Originally Posted by HoustonNW View Post
    Bryan, is your guy still interested in making restrictor plates? I would like to get a set of 4 or 5 before the dyno day.
    Yes, but I had some made for you and English last year I think but guess they weren't needed. I'll look in the garage to see what I have. Do you have a 46mm in their now or know what ones you need?
    Bryan Leinart
    CMC #24

  4. #1394
    Senior Member Grass-Passer
    Join Date
    Aug 2008
    Location
    Houston
    Posts
    299
    Quote Originally Posted by BryanL View Post
    Yes, but I had some made for you and English last year I think but guess they weren't needed. I'll look in the garage to see what I have. Do you have a 46mm in their now or know what ones you need?
    Ah, I didn't dyno with the group because I couldn't make it on the Saturday. I have a 48mm in now, so I would like a a 46, 47, 49, and 50mm plate if you find them.

    I dynoed at the same place as the group but just took what I got, which was only 252rwhp. Since I can't seem to get the car below about 3310lbs with my cool-shirt cooler I would like to get over 260 this year.
    -Wayne
    -CMC #85

  5. #1395
    Senior Member Grass-Passer jdlingle's Avatar
    Join Date
    Oct 2010
    Location
    Houston, TX
    Posts
    341
    Went to the doctor this AM to see why my eye has been bugging the shit out of me for the last three days. I think the piece of metal he pulled out explains it.

    Morale to the story- Grinding shields are f'ing worthless when you are grinding. Gonna have to pick up a pair of goggles for the next go round. Only thing I can think of is that it was metal dust that got in there.

    The upside is my two year thinks I am a pirate now with the eyepatch so I guess he will stay entertained at my expense today. Dr. says all the cornea scratching will heal so got my fingers crossed that hes right.
    2011- Texas Region CMC2 Rookie of the Year.
    2012- Broke with no car.
    2013- Author- Hard Luck Lloyd: The Complete Story of Slow-Talking, Fast-Driving Texan Lloyd Ruby

  6. #1396
    Senior Member Carroll Shelby
    Join Date
    Feb 2007
    Location
    Plano
    Posts
    1,983
    Blog Entries
    2
    Quote Originally Posted by HoustonNW View Post
    Ah, I didn't dyno with the group because I couldn't make it on the Saturday. I have a 48mm in now, so I would like a a 46, 47, 49, and 50mm plate if you find them.

    I dynoed at the same place as the group but just took what I got, which was only 252rwhp. Since I can't seem to get the car below about 3310lbs with my cool-shirt cooler I would like to get over 260 this year.
    Hmm-that seems lower than most numbers with that size plate. I know AJ used the plates when they were dynoing it for Chuck and trying different exhausts. Does it still have the T2 restrictor in it between the throttle body and intake? Or maybe that dyno is just registering low which might make some sense.
    Anyway, hopefully the plates are in the garage and not in the trailer but I will look for them. I'm also shocked you can't get the car below 3310 after a race, my last race I used 45 lbs of ballast. Though I only weigh 165 but still have room to pull more weight out of the car.
    Bryan Leinart
    CMC #24

  7. #1397
    Senior Member Grass-Passer Crumpacker's Avatar
    Join Date
    Aug 2009
    Location
    College Station
    Posts
    439
    Quote Originally Posted by jdlingle View Post
    Went to the doctor this AM to see why my eye has been bugging the shit out of me for the last three days. I think the piece of metal he pulled out explains it.

    The upside is my two year thinks I am a pirate now with the eyepatch so I guess he will stay entertained at my expense today. Dr. says all the cornea scratching will heal so got my fingers crossed that hes right.


    "Hardly, my lord, it's just an eye. The gods saw fit to grace me with a spare."
    Sam Crumpacker
    CMC #54 - '94 Creamsicle

    "Group D, Drama, to grid.."

  8. #1398
    Senior Member Grass-Passer rleng1's Avatar
    Join Date
    Feb 2009
    Location
    Larkspur, CO
    Posts
    783
    Randy English
    NASA Texas --> Rocky Mtn Region
    CMC #77 Camaro

  9. #1399
    Senior Member Carroll Shelby GlennCMC70's Avatar
    Join Date
    Mar 2006
    Location
    Ft. Worth
    Posts
    6,448
    Blog Entries
    1
    Quote Originally Posted by jdlingle View Post
    Went to the doctor this AM to see why my eye has been bugging the shit out of me for the last three days. I think the piece of metal he pulled out explains it.

    Morale to the story- Grinding shields are f'ing worthless when you are grinding. Gonna have to pick up a pair of goggles for the next go round. Only thing I can think of is that it was metal dust that got in there.

    The upside is my two year thinks I am a pirate now with the eyepatch so I guess he will stay entertained at my expense today. Dr. says all the cornea scratching will heal so got my fingers crossed that hes right.
    Went to the doctor one day cause I had this spot in my left eye's field of vision. He takes a look and grabs a small pick like tool and goes to my eye w/ it. Turns out I had a small ball of steel in there. He said it was about 50% burned into the eye ball. I guess one should not use the "close your eyes" method of eye protection when tack welding. In this instance, my timing was a little off.

  10. #1400
    Senior Member Carroll Shelby AllZWay's Avatar
    Join Date
    Mar 2006
    Location
    Paris, Texas
    Posts
    3,151
    Quote Originally Posted by jdlingle View Post
    The upside is my two year thinks I am a pirate now with the eyepatch so I guess he will stay entertained at my expense today.
    A pirate walks into a bar with a steering wheel sticking out of his fly. The bartender says "What's the steering wheel for?" The pirate says "Arrrr....it's driving me nuts!"


    I can relate..... a few years ago I was working on the car and ended up jabbing myself in the eye with a pair of needle nose plyers. Blood coming out of the eye and all.... it took a few weeks, but it all healed up well.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •