On my rear end, I had a clip walk off causing a u-joint cap to pop out on me during R2 (ran fine on dyno, practice, and qual prior). I made a boneheaded move when replacing the caps that night and caused some more damage, but that's on me (didn't know how the clips work, now I do).
What I'm curious about is if there is a better style of clip used to retain a 1.125" U joint cap than the dinky, soft 3/4 copper clips that they come with:
http://www.oreillyauto.com/site/c/de...7127&ppt=C0362
It was way too easy for me to push them on and way to easy to deform them into being loose, and that is all that keeps a u joint cap in place.
I'm thinking a steel snap ring that requires snap ring pliers, maybe backed up with a little safety wire, something like this:
http://www.toolsource.com/prod_medium/71041.jpg
I can get a snap ring from a HW supplier, but looking to see if there is a solution dedicated/tested to U-joint purposes out there, or a particular brand of U joint that comes with as such?
Also wondering if there is a different style of U joint strap out there that mechanically retains the U joint cap on the outside so I'm not just relying off the clips on the inside. This is what I run on the car now (bought new ones this weekend):
http://www.oreillyauto.com/site/c/de...=u+joint+strap
The straps don't really bother me, just the super soft clips...
Bookmarks