Quote Originally Posted by Pranav View Post
As Gary said, the snap rings are internal, and all 8 of them are in there. The caps are pressed in as far as they can go...
Ummm...I see a problem. The caps cannot be pressed in so that they bottom out. They need to be backed out against the snap rings or you will have an early failure. To do this, set the yoke on an open vise so that the ears are supported and, using a soft face deadblow hammer strike the opposite flange to seat the bottom cap into the snap ring. Flip it over and repeat. Do the same for the other two caps. The yoke should have absolutely no resistance when moving it back and forth.