Mine get a small amount of red locktite and are torqued with a large cheater bar. A larger cheater bar is needed to loosen them. Never used heat. Best plan is to avoid having to remove them every week, but you knew that...
Richard P.
Printable View
I cut one end off an 11mm wrench, then slip a long half inch square tube over it and torque the hell out of them. I don't use locktite. Drilling those bolts to safty wire would be difficult, unless Jeremy was arround. FMR
I use blue gel locktite and a 12mm, 12 point short socket with a flex head ratchet. Works good.
Jerry, what are exact dimensions/ thread pitch on the bolts?
They sel bolts already drilled.
McMaster-Carr.
Welcomed home a new pony to our stable today. We are done with kids so now its just cars....did I mention I used to be a Camaro guy...how times have changed....
This is my wife's new car...Mandy is the name.
Attachment 1018
I saw this today.
That's aviation gear up on the dash. Attitude/altitude.
The driver had a millenium falcon shirt on when he came out of AZ.
jb