I can relate... We are in Playa del Carmen... Left on Thursday. I think I can really send you a note until tuesaday.
Printable View
So I pulled my car off the trailer and onto a lift today... The transmission is fine, but it turns out that I disentegrated the Griggs Torque Arm bushing. That led to the torque arm hammering up/down and breaking the driver's side crossmember bracket which is welded to the subframe connector. That "slop" allowed the front bushing bolt of the T/A to rotate into the driveshaft, causing the horrible noises. So, it appears that it can be fixed with about $100 worth of Griggs parts and a bit of TLC with the welder...
On the up side, I'm glad the bolt hit the D/S, otherwise if the whole crossmember dropped out of the car and under braking became a catapault... that would have been BAD...
Guess I had someone looking after me...
Pics to follow.
First 10 minutes of Race 4...
http://vimeo.com/25441290
After watching a couple laps, I think you could benefit from one (or both) of these.
http://www.pelicanparts.com/catalog/...owhel_pg26.htm
Attachment 888
http://www.pelicanparts.com/catalog/...owhel_pg25.htm
Attachment 889
I have my wheel stacked almost 3" and it help tremendously.