OK, our turn. Dan needs a 4th gen LT K-member before Hallett. We were wrapping up the car prep for Hallett when we noticed cracks on the control arm mounts on both sides of the K-member. Both sides have already been welded up previously because of control arm mount cracks. That just transfers the load to the next weakest part. Cleaning up the crack on the passenger side showed the crack has propagated from the control arm mount up to the seam between the halves. The thing is split in half from the rack mount all the way up to where it mounts to the frame. That would be why the steering was shuddering at the last DE...

I don't think this one can be reliably fixed. We really need a fresher one to preemptively weld up and install before the big event at Hallett in 9 days. Anyone have one or have leads on one in the Houston area?


Thanks,
Richard P.